You are here: front page / Product Center / Galvanized Steel Wire / hot dip galvanized steel wire rope

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

hot dip galvanized steel wire rope

Hot-dip galvanized steel wire rope is a market trend and will become the first choice for galvanized steel wire rope users.Because hot-dip galvanized steel wire rope has a very high cost performance.
Availability:
Quantity:

Galvanized steel wire technical parameters

 Galvanized steel wire ropes are divided into two categories: cold-dip galvanized steel wire ropes and hot-dip galvanized steel wire ropes.There is an essential difference in process between hot-dip galvanizing and cold-dip galvanizing. Hot-dip galvanizing relies on physical thermal diffusion to form a coating. First, an iron-zinc compound is formed, and then a pure zinc layer is formed on the surface of the iron-zinc compound.The highest zinc content on hot-dip galvanizing is only 593g/m2.Hot-dip galvanizing will reduce the mechanical properties of the steel wire. Galvanized steel wire ropes that require high strength and high corrosion resistance are often twisted by electro-galvanized steel wire.Hot-dip galvanizing is zinc plating in molten zinc liquid at 450-480 degrees.


Hot-dip galvanized steel wire rope is a market trend and will become the first choice for galvanized steel wire rope users.Because hot-dip galvanized steel wire rope has a very high cost performance.The steel wires of hot-dip galvanized steel wire ropes form coatings by physical thermal diffusion. First, an iron-zinc compound is formed, and then a pure zinc layer is formed on the surface of the iron-zinc compound on the surface of the galvanized steel wire.The highest zinc content on hot-dip galvanized steel wire rope is only 593g/m2.Hot-dip galvanizing is zinc plating in molten zinc liquid at 450-480 degrees.


Table 1: Steel wire tensile strength table/Tensile Strength

Nominal diameter

Nominal Diameter(mm)

Nominal tensile strength

tensile strength (MPa)

0.6-2.0

95010501150125013501450


Table 2: Zinc layer weight table  / Zinc Coating Weight Table

Nominal diameter

Nominal Diameter(mm)

Minimum zinc layer weightMin, coat weight(g/m²)

Tensile strength (s1150)

tensile strength(≤1150)

Tensile strength (>1150)

tensile strength(>1150)

0.6-1.0

60-120

Negotiable

1.0-2.0

60-120

Negotiable

Previous: 
Next: 

Product Categories

contact Us

Follow us

Quick Navigation

Leave a Message
contact Us

Product Categories

Contact us

0510-86138062
13771618998
Copyright 2023 Jiangyin Dimeng New Materials Co., Ltd. All rights reserved | SitemapPrivacy Policy